ORIGINAL ARTICLE |
|
Year : 2016 | Volume
: 2
| Issue : 3 | Page : 10-13 |
|
Republication: An inexpensive solution for laparoscopic simulation
Dorothy A Sparks, Daniel M Chase, William S Lee
Department of Surgery, Northside Medical Center, Northeast Ohio Universities College of Medicine, Youngstown, OH, USA
Correspondence Address:
Daniel M Chase Department of Surgery, Northside Medical Center, Northeast Ohio Universities College of Medicine, 500 Gypsy Lane, Youngstown, OH 44505 USA
 Source of Support: None, Conflict of Interest: None  | Check |
DOI: 10.4103/2455-5568.188732
|
|
Teaching residents the art of laparoscopy is one of the most important and most difficult tasks of any surgical residency. The disorientation of working in a small enclosed space with a modified field of vision and limited tactile feedback requires repetition and practice to overcome. Many hands-on hours are required to become proficient. Laparoscopic trainers have allowed for training outside of the operative setting, but they are notoriously expensive. Fortunately, with the advent of inexpensive camera technology, a very serviceable laparoscopic trainer can be built with household tools for <$150 USD. Here, we describe how to construct such a device. Although simulation is never truly representative of the surgical experience, it provides a safe environment for residents to hone their laparoscopic skills. The construction and use of low-cost laparoscopic training boxes such as ours allow surgical residents to gain valuable laparoscopic skills at minimal expense.
The following core competencies are addressed in this article: Medical knowledge, Practice based learning and improvement, Systems based practice.
Republished with permission from: Sparks DA, Chase DM, Lee WS. An inexpensive solution for laparoscopic simulation. OPUS 12 Scientist 2008;2(5):1-3. |
|
|
|
[FULL TEXT] [PDF]* |
|
 |
|